The paper faced gypsum board production line is the professional equipment for producing the new decoration matrial.The principal working process includes:
1.Calcined gypsum powder ,water and other additives enter into mixer by automatic metering system and converying system.Gypsum slurry ,generated from mixer after mixing,would be evenly scattered on the surface of continuous moving bottom paper.
2.With continuous moving and vibrating.gypsum slurry will gradually diffuse and evenly scattered on the surface of moving bottom paper.Then it goes into the forming machine and compound with top paper.By the process of extruding and forming ,the slurry would be sealed by top paper and bottom paper ,Thus , pulpous continuous plasterboard is formed.
3.While it conveyed by selling belt,wet gypsum board gradually formed after board shaping,natural coagulation and automatic cutting.The wet boards arrahged by programmed control system,quickly enter into dryer through rollers ,bell conveyor and board turnover.
4.Under strict controls in temperature zones of dryer ,the wet board dried by different temperature,hot air blow.Modified starch would stick with the paper .Then dry gypsum boards would be transported out of dryer.
5.Then the board be turned over again and folded together,cut into certain finished product size and edge sealed.
6.Finally it comes to automtic stacker for stacking.Then can be transported to warehouse by forklift after stacking.