Fiber cement board production line solution

Realize Your Fiber cement board Product Vision With Us

There are two production processes for fiber cement board production lines: the flow-on process and the hatschek process. Due to its simple equipment structure, low raw material requirements and equipment investment, the flow-on process has become the most widely used production process in the fiber cement board industry. It is based on cement and supplemented with appropriate fiber-reinforced materials.

The fiber-reinforced cement board production line includes the following systems:

Slurry preparation system

Slurry preparation system

The reinforcing fibers (such as asbestos(optional), paper pulp, etc.) are loosened and pulped, and then mixed and stirred together with calcareous materials (such as cement, quicklime, etc.) and siliceous materials (such as silica sand, fly ash, etc.) in a pulping machine to produce a slurry of a certain concentration. The slurry is then uniformly and continuously supplied to the plate-forming machine through a bucket storage tank.

View more
Sheet forming system

Sheet forming system

After the slurry enters the sheet-forming machine, it is made into billets. The billets run on the billet receiving machine and are longitudinally cut to the vacuum stacker under the suction cups of the machine, the vacuum stacker completes the cross-cutting of the billets and stacks the slabs. According to the different requirements of the products,the pallets can be pressurized or not.

Pre-curing and autoclaving system

Pre-curing and autoclaving system

The board mold stack is pre-cured in the pre-curing room to a certain strength, and then demolded by a vacuum demolding machine. After demolding, the board stack is sent into the autoclave for high-temperature and high-pressure steam curing, which promotes the hydration reaction between the siliceous raw materials and the calcareous raw materials in the board, producing artificial stone with the main hydration products being C5S6H5 tobermulite crystals and a certain amount of cementing body, and having a certain strength.

Drying, edge grinding, chamfering and surface sanding treatment system

Drying, edge grinding, chamfering and surface sanding treatment system

After being processed by a dryer, edge grinding machine and sanding machine, the plates become finished products ready for factory shipment. Furthermore, According to the different demands of the market, the finished boards can also go through processes such as cutting, roller coating and drilling for further deep processing Industrial exterior wall decorative panels, decorative ceilings, sound-absorbing boards, etc.

Deep processing system

Deep processing system

According to the different demands of the market, the finished boards can also go through processes such as cutting, roller coating and drilling for further deep processing Industrial exterior wall decorative panels, internal wall decorative panel,decorative ceilings, sound-absorbing boards, etc.

Autoclave Curing & Unstacking Section

Autoclave Curing & Unstacking Section

Equipped with water metering tanks, hydraulic fiber dispersers,two-phase flow pulp pumps and other equipment.

Drying Section

Drying Section

Equipped with water metering tanks, hydraulic fiber dispersers,two-phase flow pulp pumps and other equipment.

Edge Trimming & Chamfering Section

Edge Trimming & Chamfering Section

Equipped with water metering tanks, hydraulic fiber dispersers,two-phase flow pulp pumps and other equipment.

Environmental Protection Equipment & Heating System

Environmental Protection Equipment & Heating System

Equipped with water metering tanks, hydraulic fiber dispersers,two-phase flow pulp pumps and other equipment.

Electrical Automation System

Electrical Automation System

Equipped with water metering tanks, hydraulic fiber dispersers,two-phase flow pulp pumps and other equipment.

The characteristics of fiber-reinforced cement board products

The characteristics of fiber-reinforced cement board products:

  • 1. Non-flammability: It will not burn and will not release toxic smoke.
  • 2. Thermal insulation: Low thermal conductivity and excellent heat insulation effect.
  • 3. Water resistance: It can maintain its shape even after long-term use and will not expand or deform.
  • 4. Sound insulation: Reduce indoor noise.
  • 5. Environmental friendliness: The special properties of high-density reinforced fiber cement boards create a more comfortable environment.
  • 6. High strength: High strength and impact resistance, not easy to be damaged.
  • 7. Durability: Resistant to insects, mold and corrosion, the reinforced fiber cement board has a long service life.
  • 8. Easy to install: It can be painted, tiled and nailed, etc.

Application places

Fiber-reinforced cement board is a new type of building material which is widely used in various industrial and civil building fields, such as exterior walls, interior walls, ceilings, sound insulation and waterproof boards for special facilities. When used in combination with steel-frame structure and filling materials, it can also be applied in the construction of some frame lightweight board systems, high-rise buildings, old building renovations, light workshops, control rooms and laboratories. Due to its short construction period, low energy consumption and significant economic benefits, fiber-reinforced cement boards are favored all over the world.







We offer:

Gypsum Powder Production Lines - meeting the customer's requirements or the agreed product goals

  • Turnkey projects
  • Product and market assessment
  • Land acquisition
  • Factory design and construction
  • Civil engineering
  • Machine design and manufacturing
  • Installation and commissioning
  • Personnel training and ignition support

Technical support:

  • Feasibility study
  • Raw material analysis
  • Upgrading of existing equipment After-sales service
  • Services and Maintenance

Ready to build new production lines or Upgrade Your Production?

24/7 Support
Global Shipping
ISO Certified
Mandatory field. Please fill in
Mandatory field. Please fill in